With the rebounder in the open position and legs in place (as if you were going to jump on the rebounder), locate the two velcro type straps on the new spring cover. Position them to be in line with the hinges of the frame.

	Start at the seam and pull the shock cord over the leg on both sides of the seam.
	Move to the next leg (either to the right or left) and repeat
	Stretch the cover over the rebounder and position it evenly. This will aid in pulling the shock cord over the remaining 3 legs.
	NOTE: To get the proper amount of shock cord to stretch over each leg, pull the cord from both directions of the leg opening.

Whenever a rebounder is to be opened or closed, the velcro type straps must be around the spring cover first.

View Product Line